The shower cabin will help you wash off the dirt accumulated during this hard day. But all this dirt is not completely washed down the drain with water. Part of it remains on the walls of the shower cabin, gets stuck in the corners, and hard water leads to the appearance of plaque. Additionally, high humidity activates the development of mold. To maintain cleanliness in the bathroom, first of all, you need to figure out how to clean the shower cabin from dirt.

Stages of cleaning

Use the following instructions:

  1. First, clean the walls of the shower cubicle. If they are made of plastic, then a dark coating may appear on them later. Therefore, you need to take care of such a shower more often than a glass one.
  2. Wipe down all metal surfaces. Use only mild formulations and a soft sponge, as shiny parts can be easily scratched.
  3. Clean the pan sink. Means should be chosen depending on its material. Pay special attention to the joints.

How to remove plaque and rust

  • Dishwashing liquid does a great job with soap bubbles . Apply the product to a sponge, wipe the surface and leave for 20 minutes. Pour the walls with hot water, and then with cold. Finally, wipe the shower cabin dry.
  • Citric acid will help remove lime scale. Dissolve 1 teaspoon in water, apply the solution, and wash off after 10 minutes. You can also add a little baking soda to this composition.
  • Vinegar will get rid of limescale and rust . Spray it on and leave it on for 30 minutes. Then wash off the product with water. Vinegar penetrates clogged holes and nozzles.
  • Another effective method of plaque removal is treatment with a steam generator . With its help, you can quickly remove dirt and disinfect the surface. But keep in mind that hot steam cannot affect plastic.
  • To clean shiny and chrome surfaces, glass and mirrors, use ordinary vodka. Mix with water in a ratio of 1 to 2 and wipe the contaminated areas.
  • Baking soda perfectly removes stubborn dirt. But it can leave scratches on plastic.

How to wash the shower cabin from dirt

How to properly clean the pallet

It is necessary to take into account the material from which it is made.

  • Enamel

The enameled pallet cannot be cleaned with alkaline compounds, as well as products containing formaldehyde and acids. To clean the enamel, you can use the special tool “Comet” or “Pemolux”, as well as prepare the composition with your own hands. Make a slurry of water, baking soda and citric acid and treat the dirt. Wash off after 30 minutes.

  • Artificial stone

Such a pallet may turn black. Any means for cleaning the toilet bowl will help to bring it to order. Apply it for half an hour and then wash it off.

  • Acrylic

Do not use aggressive or abrasive agents on the acrylic surface. You can use whitening toothpaste, which should be applied to the dirt and left for 15 minutes.

  • Tile

Any special agent, liquid or powder, is suitable for cleaning. And also use a simple recipe: squeeze the juice from 1 lemon, mix it with 50 ml of vinegar and a bottle of ammonia. Dilute the mixture in 1.5 liters of water and rub the tile. After that, wash off the solution.

How to remove mold

Fungus in the bathroom is formed as a result of high humidity. It is necessary to eliminate dark spots, because mold is dangerous for health.

Ways that will help to cope with the problem:

  • Apply the composition containing chlorine to the affected areas and wait 2 hours for the product to take effect. After that, clean the surface with a sponge. Don’t forget to use gloves.
  • Prepare a solution of vinegar and ammonia in equal proportions and treat the problem areas. Wash the composition with a solution with soda (1 teaspoon of soda per glass of water).

What do you use to clean the shower cabin? Write to us in the comments.

How to wash the shower cabin from dirt, plaque and mold