Linoleum is an affordable and practical floor covering. It is used in residential and non-residential premises – from the kitchen to the children’s room. In general, it is not difficult to take care of the material, but it is more difficult to clean linoleum after repair work or spilled drinks. The choice of means to wash linoleum from stains at home should be approached responsibly, as some of them can seriously damage the color or condition of the coating, and it will be almost impossible to restore such places.

Traces after repair works

Sometimes there is no need to change the floor covering, but housewives may face the difficulty of removing traces of repair. To simplify the task, before starting work, the floor can be covered with a film and fixed with tape on the plinth. You need to remove them only after completing all major works, otherwise a large amount of dirt will stick to the glue, which will be difficult to remove.

How to wash linoleum from stains

From cement, whitewash and putty

After repair, linoleum often leaves white marks from building materials. You can solve the problem as follows:

  1. First, sweep the floor to remove any abrasive particles that could damage the coating.
  2. Carefully scrape off the hardened putty with a spatula.
  3. In warm water, add a couple of spoons of salt and some household soap, grated on a grater. Wash the linoleum with the prepared solution.
  4. Change the water and add a little potassium permanganate to it to make a light pink solution. Wipe again.
  5. Wipe the floor covering dry.
  6. To make linoleum shine, rub it with a woolen cloth dipped in linseed oil or olive oil.

It is better to immediately wipe the primer with a damp cloth, otherwise it may be necessary to use special means. For example, you can remove traces of the primer with a solvent, but first check its safety on the remains of the material or in an invisible place.

From the paint

You can remove the paint from the linoleum with vegetable oil if it has not eaten. Follow simple steps:

  1. Put a few drops of oil on the paint.
  2. Wait a couple of minutes for it to soften.
  3. Then wipe with a linen cloth or the hard part of a washcloth.
  4. Wash the floor with a warm soapy solution.

It is more difficult to remove dried paint. White spirit can cope with it, but it should be used carefully, as it can damage the coating. Dip a cotton pad in the solvent and wipe the stain. When finished, rub the floor with oil.

From mounting foam

Due to excellent adhesion to any surfaces, the mounting foam is difficult to remove. It is advisable to remove traces immediately, before the material has time to harden. If the moment is missed, carefully cut the upper part of the material with a sharp knife. Then use a special tool to remove the mounting foam. You can find it in a hardware store or on the market. Use the tool strictly according to the instructions, do not increase the holding time.

Pay attention ! Do not scrape the foam with hard brushes or sharp objects. It is not recommended to use acetone or other aggressive substances for removal.

how to clean the floor covering

How to wash dirty linoleum?

In order for dirty linoleum to shine clean again, you can wash it with special detergents. If you are not a fan of chemicals, when washing the floors, add soap shavings to warm water, but it is better not to use powder. Its abrasive particles can leave scratches.

In the kitchen, greasy stains are washed off with dishwashing detergent:

  1. wipe the contamination with a damp cloth,
  2. drip detergent and wash again with a cloth.

Folk remedies will help restore the attractiveness of the floor covering.

Vodka

Alcoholic drink is used as follows:

  1. Dilute a few drops of dishwashing detergent in a liter of warm water. You can replace it with shavings of household soap.
  2. Add a glass of vodka.
  3. Soak a soft cloth in the prepared solution and wipe the linoleum, paying attention to dirty places.
  4. After that, you should wash the floor with clean water.

When using this method, linoleum in the kitchen is well washed from traces of grease. Vodka washes away dirt well, even from a surface with a relief.

Kerosene

You can get rid of dirt with a weak solution of kerosene. Add just a couple of spoons of this substance to a bucket of water. Wash the floor covering with the prepared solution. You can eliminate the unpleasant smell with clean water, to which you should add a little vinegar.

To restore the attractiveness of the old linoleum, it can be washed with a solution of milk and water (proportions 1: 1) or cleaned with special mastics sold in stores.

Pay attention ! Do not use abrasive substances when cleaning. Refuse to use linen, turpentine, solvents and other aggressive substances without special need.

how to wash linoleum

How to remove stains?

Stains of various origins may appear on linoleum. To fight them, choose a suitable folk remedy.

  • Footprints . Black stripes from shoes often appear near the front door. You can remove them with an ordinary stationery eraser. Just rub the problem area with an eraser.
  • Ink from a pen . Carefully rub the pen paste with fine-grained paper. The main thing is not to overdo it so that there are no traces of scratches. Then rub the area with linseed oil. According to the same principle, you can wipe the pen with pumice stone.
  • Rust . You can remove a rusty stain with lemon juice. The best alternative to it is bleach. It is allowed to use a very weak solution (1 tablespoon per bucket of water).
  • Felt-tip pen or marker . If there are children living in the house, marker marks on the floor are not uncommon. They are especially noticeable on a light coating. To remove them, soak a small piece of cloth or cotton wool in hydrogen peroxide and wipe the problem area with it. This method copes even with the removal of a permanent permanent marker. Vodka is also used to remove the felt-tip pen. Dilute it in warm water with the addition of a small amount of detergent.
  • Paint for shoes. Fresh traces of shoe paint are easily removed with a solution of detergent or soap. If the substance managed to eat into the coating, wipe the stain with hydrogen peroxide. Instead of antiseptic, use gasoline or kerosene, but with caution. First, check their interaction with linoleum in an invisible place.
  • Paint for a printer . If the ink from the cartridge spilled on the floor, wipe it carefully with a solvent, and then immediately wash it with warm, soapy water. To restore the shine, rub the floor with oil.

Zelenka and iodine

If iodine or green paint got on the floor covering, the problem can be solved in several ways:

  1. Mix soda with water to make a paste. Put it on the stain and leave it for a while. Carefully remove the soda and rinse with clean water.
  2. Dilute potassium permanganate in acetic acid. A bright pink solution should come out. Wet a cloth in it and apply it to the stain. Leave for a few minutes. Remove the remains with hydrogen peroxide.
  3. Saturate the cloth with nail polish remover. Put it on the spilled iodine or green tea and leave it for 20 minutes. Remove the rag and wash the floor.

Pay attention ! To remove pink spots from fucorcin, it is enough to sprinkle them with tooth powder. It can also be used to remove green spots.

Try to remove all stains immediately. Substances that have penetrated into the material are more difficult to remove. Choose the safest methods of removing stains and dirt so that linoleum serves you for a long time and does not lose its attractive appearance.

How to wash linoleum from stains and dirt – the top 10 best ways