Has your kitchen hood lost its effectiveness due to accumulated grease and dirt? Want to learn how to clean this device yourself without the help of a wizard? In this article, we will consider 8 effective ways to clean the hood in the kitchen from grease and return it to its former cleanliness.

Why does the hood get clogged with grease and dirt? The kitchen hood is designed to clean the air from fat, fumes and odors that are formed during cooking. With proper functioning, the filter of this hood accumulates a layer of grease over time. If you don’t clean the hood regularly, its efficiency will decrease significantly.

How to wash the filter of a kitchen hood from grease

Preparing the hood for washing

Before starting the cleaning process, it is necessary to disconnect the hood from the electrical network and disassemble it, since it can be inconvenient to perform this procedure over a gas stove. In addition, it is recommended to read the user manual before washing, where the manufacturer indicates which detergent is suitable for this model. It is important to take into account the material from which the body and parts of the hood are made, since an incorrectly selected tool can damage them.

To prepare the device for washing, follow these steps:

  1. Disconnect the fasteners of the front panel and pull it out of the grooves of the hood. If it is mounted on bolts, they must be unscrewed and folded together. The panel should be thoroughly washed with detergents.
  2. Pull out the filter of the kitchen hood for soaking in water with the addition of a detergent. After washing the filter, it should be rinsed well and allowed to dry.
  3. Remove the pipe that connects the device to the vent. After removing cobwebs and fat from it, prepare it for further cleaning.
  4. Clean the body of the unit from dirt both outside and inside.

Note that some models may require the air filter to be removed as well. Information about this can be found in the instructions that come with the hood.

Each part should be thoroughly cleaned of grease and dirt so that it is ready for reassembly.

Recommendation: this method is suitable for cleaning the device with traces of heavy dirt. If the pollution is not so great, then in this case it may be necessary to wash only the filter.

Cleaning the kitchen hood and its parts

There are many methods that will help wash fat deposits from the kitchen hood:

  • liquid chemicals;
  • powder preparations;
  • bleaching agent, linen;
  • means for washing dishes;
  • soda solution;
  • ammonia;
  • acetic acid or lemon juice;
  • solution based on household soap.

Let’s consider each of them in more detail.

How to clean the hood in the kitchen from grease

Method 1 – powder preparations

Cleaning the internal parts of the hood can be easily done using powder products, while the following sequence of actions should be followed:

  1. Place the filter in a deep pan and evenly distribute the cleaning powder over its surface.
  2. Pour hot water over the mesh, causing the detergent to react with the grease, and leave for 10 minutes.
  3. Remove the filter from the pan and rinse thoroughly.

Tip : Powder products will remove accumulated grease from the surface of the filter well. However, it is worth remembering that such a harsh cleaning method should be used carefully and not too often, since the alkali contained in these products can damage the metal components of the filter.

Method 2 – liquid chemicals

Washing of a heavily contaminated filter is carried out with the help of liquid aggressive means that are used for cleaning drain pipes, for example, “Mole”. The procedure should be performed following the following sequence of actions and precautions:

  1. Dilute the product in water in a stainless container according to the instructions.
  2. Immerse the filter in the prepared solution and leave for 15 minutes.
  3. After the time has passed, the hood should be thoroughly rinsed, removing all traces of grease and cleaning solution.

It is important to read the instructions for use before soaking, as different preparations may require different water temperatures, for example some may require cold water while others only require hot water.

Method 3 – “Underwear”, bleaching agent

This method has proven itself well for cleaning the hood body, and is also effective for removing grease from other parts of the device. To do this, you should perform the following steps:

  1. Moisten the contaminated areas on the parts with a damp cloth.
  2. Apply the bleach to the stained areas with a toothbrush and leave for 10 minutes.
  3. Then clean the remaining fat deposits and thoroughly rinse the parts under running water.

This method is effective for removing grease and dirt from the surface of the hood, but you should take precautions and use protective equipment, as bleach can be aggressive.

Method 4 – dishwashing detergent

Using dishwashing detergents, it is easy to remove fresh dirt. The procedure should be performed as follows:

  1. Place the filter in a wide container and pour hot water over it.
  2. Apply detergent to the sponge and treat the entire surface of the part.
  3. After that, wipe thoroughly with a brush of increased hardness.
  4. Complete the procedure by pouring boiling water over the filter again and rinsing it under cold water.

If the first cleaning did not remove all contamination, you can try to repeat the procedure or apply more intensive cleaning methods.

Method 5 – soda solution

If the filter and the mesh are covered with a large layer of fat, it is possible to remove impurities using folk remedies, in particular, soda. To do this, follow the following algorithm:

  1. Take a large container and fill it with water (about 10 liters), then place it on the stove for boiling.
  2. Gradually add the baking soda (about 1/2 cup) while heating the water, stirring constantly, until the baking soda is completely dissolved.
  3. Place the hood parts in a container of boiling solution and keep them on fire for 30 minutes. If the mesh does not fit completely in the solution, you can immerse it first on one side, then the other, alternately.
  4. After completing the procedure, remove the parts and rinse them thoroughly in clean water.

The main advantage of this method is that the boiling soda solution allows you to remove various types of dirt without the risk of scratches that can occur when using abrasives.

Method 6 – ammonia

If there are old deposits on the filter that are not even removed by boiling soda solution, they can be removed using ammonia. For this, the following sequence of actions should be followed:

  1. Add ammonia (about 1/2 cup) to hot water (about 3.5 liters).
  2. Put the parts in this solution and leave them there for 1-1.5 hours.
  3. After this time, remove the parts and rinse them thoroughly in clean water.

Important : since a strong smell can be felt in the room during ammonia treatment, in order to avoid irritation of the mucous membrane, it is recommended to use a mask and carry out the procedure with an open window. Gloves should be used to protect the skin of the hands.

Method 7 – using acetic acid or lemon juice

The best cleaning result can be achieved using undiluted vinegar (acid). It is important to wear gloves when handling this product to prevent possible skin irritation. The procedure is performed as follows:

  1. Take the acetic acid and apply it to the parts with a sponge or a toothbrush.
  2. Leave them for 20 minutes until the impurities dissolve.
  3. After that, you can remove the remaining fat with a sponge and thoroughly rinse the parts under running water.

Lemon juice is an excellent alternative for old fat deposits. To do this, rub the filter with lemon pulp and leave it for 10 minutes. Then wipe the lemon residue with a cloth and remove the dirt. Instead of lemon, you can use citric acid or squeezed juice.

This process can be repeated several times until the desired result is achieved.

How to wash the filter of a kitchen hood from grease

Method 8 – a solution based on household soap

It is also an effective method to combat soot. Grease can be easily removed using ordinary laundry soap (72%). To prepare the solution, you should perform the following steps:

  1. Take half a piece of household soap and rub it on a coarse grater.
  2. Bring 3 liters of water to a boil and pour them into a container with prepared soap shavings, leave for half an hour.
  3. Then use the infused solution to rub the areas of parts with the largest accumulations of dirt and grease.
  4. After 10-15 minutes, use a sponge or plastic scraper to mechanically clean the surfaces.
  5. After completing the procedure, thoroughly rinse the parts in clean water and dry with a dry towel.

This method will help remove grease and dirt effectively, leaving parts clean and shiny.

Regularity of hood cleaning

Some modern hood models have disposable, removable filters that can be easily replaced with new ones when they are heavily soiled. However, many modifications do not have this capability, so cleaning the grille becomes a necessity.

You can remove grease, dirt and other contaminants from the kitchen hood using one of the methods listed above.

It is important to remember that this procedure is carried out much easier if at least once a month the device is washed with a detergent, and a complete cleaning of all parts is carried out at least once a quarter.

Fresh grease can be removed from the hood with a regular detergent and a sponge. In severe cases, you should first separate the areas of contamination and grease with a sharp object, such as a spatula or knife, and then treat them with one of the agents.

You should not delay cleaning the kitchen hood. A regular procedure will save you time and keep the device in good condition.

How to clean the hood in the kitchen from grease